Customization: | Available |
---|---|
Outer Tube Diameter: | 2.0-3.0mm |
Material: | PE,PVC, LSZH |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Optical Fiber Heat Shrink Protective Tube Fiber Pipe Fusion Splice Protection Sleeve
Product Description
Sleeves Consist of cross linked polyolefin, hot fusion tubing and stainless reinforcing steel rod which keep optic transmission properties of optical fiber and enhance the protection to optical fiber splices. Optic Fiber Protective Sleeve is applied to protection fiber optical splice. It is made up of stainless reinforcing steel rod, heat shrinkable tubing and cross linked polyolefin. Rebuild the covering layer of the fiber and provide excellent mechanical strength in the joint. Guarantee good optical transmission performance. Easily operating to the optical fiber during installation without damaging and clear sleeve make it easy to detect splice before shrinkage.
Fiber Optic Sleeve Characteristics
Single holed (pre-shrunk)
Clear sleeve design
Smooth stainless steel reinforcing member
Sealing structure suitable to temperature
Extended liner length
Low shrink temperature
Pre installed stainless steel or ceramic rod
Accommodates single or ribbon fibers
Wide range of sizes
Operating temperature -45degree to 100degree
Min. full recovery temp: 120degree
Fiber Optic Sleeve Application
Fusion splicing
Fiber cable protecting
Product Features
Name: Fiber Optic Protection Sleeve
Type Application: Single fiber or Ribbon fiber
Material: PE heat shrink tube, fusion tube, 304 steel rod
Length: 60 mm or Customized Request
Tubing Outer Diameter: 3.0, 2.6, 2.4, 2.2, 1.3mm or Customized Request
Steel Rod Diameter: 1.5, 1.2,1.0, 0.8, 0.5mm or Customized Request
Working Temperature: -45 ºC to + 110 ºC
Shrinking Temperature Range:120 ºC
Density: 0.94G/Cm3
Elongation at Break: 700%
Tensile Strength: 18m PA
Standard Color: Clear
Other Color Available
White, Blue, Grey, Yellow, Brown, Black,
Orange, Pink, Red, Cyan, Green, Purple